WhoshouldIsee Tracks
Sanisub 800

Sanisub 800

The Sanisub 800 is a submersible water pump for removing flood water from buildings or cellars:

  • Automatic triggering
  • 7m immersion depth (max)
  • Portable pump
  • 5mm suction without drain
  • 20mm particle size
  • Integrated non-return valve
  • Float lock ring included
£0.00

The Sanisub 800 is a submersible clear water pump for removing flood water from buildings or cellars. It can lift water up to 11m. It is triggered automatically by an integrated lever float. Versatile, it can be transformed into a low suction pump for residual water by using its removable drain and the float lock for continuous operation.

...

See more

Technical data sheet

Technical data
Electrical class I
Type of activation Float
Materials
Pump body PA 6 GF
Shaft Stainless steel
Waterproofing NBR
Impeller PA 6 GF
Electrical characteristics
Voltage 230 V
Frequency 50 Hz
Power consumption P1 800 W
Power output P2 600 W
RPM 2800 rpm
Immersion depth 7 m
Power cable: Length 10 m
Hydraulics
Max. flow rate 15 m³/h
Discharge diameter G 1"1/4 inch
ON/OFF level 250/130
Particle size 20 mm
Max. permissible temperature of the pumped liquid 70°C (5 mins)
Wheel type Multi-channel wheel
Max. Head (m) 11
Identification & Logistics
Gross weight 6,5 kg